How Should PVC Impact-Resistant Handrail Strips Be Installed?
Release time：2020-07-21
page views：
Crash rails are one of the most important safety features in hospitals; they help prevent patients from falling or colliding with objects, thereby reducing the risk of injury to patients and their families. Therefore, when installing crash rails, the following aspects must be taken into consideration: First, planning and design must be based on the hospital’s specific circumstances. For example, when installing them in patient rooms, factors such as the location and number of beds must be considered; when installing them in hallways and stairwells, factors such as foot traffic volume and walking speed must be taken into account. Second, appropriate materials and styles must be selected. Anti-collision handrails are typically made of materials such as aluminum alloy, stainless steel, and plastic, each with its own characteristics, advantages, and disadvantages. Therefore, material selection should be based on actual conditions. In addition, there are many styles of impact-resistant handrails, such as straight, curved, and wavy, and the choice should be based on actual needs.
1. Determine the Installation Location: Before installing impact-resistant handrails, their installation locations must first be determined. Generally, they should be installed in areas prone to collisions, such as ward entrances, corridor corners, and stairwells. At the same time, patients’ movement patterns and habits should be taken into account to ensure the handrails serve their purpose effectively.
2. Measure Dimensions: After determining the installation location, the space must be measured to ensure the length and height of the impact-resistant handrails meet requirements. Generally, the height of the handrails should be approximately at the patient’s waist level, while the length should extend to cover the areas where the patient is likely to come into contact with them.
3. Install the Bracket: After taking measurements, secure the bracket to the floor. The choice of bracket should be based on the hardness and stability of the floor to ensure it is sturdy and reliable.
4. Install the Handrail: Once the bracket is in place, you can begin installing the anti-collision handrail. First, secure the handrail’s base to the bracket, then attach the main body of the handrail. During installation, pay close attention to whether the angle and height of the handrail are correct, and check for any looseness or wobbling.
5. Testing and Acceptance: After installation is complete, the impact-resistant handrail must undergo testing and acceptance. Testing methods include both tactile and visual inspections. The tactile test primarily checks for obvious scratches or dents on the handrail, while the visual test verifies that the handrail’s color and appearance meet requirements. If the test results are satisfactory, the handrail can be officially put into use.
